osseospeed tx  (Astra Tech Inc)

Journal: Clinical Implant Dentistry and Related Research

Article Title: Impact of High Insertion Torque on Implant Surface Integrity

doi: 10.1111/cid.70030

Figure Lengend Snippet: Surface roughness S a , S dr , and S sk parameters (mean and SD) and material volume of the implants before and after insertion into bone (* p < 0.05 and ** p < 0.01, *** p < 0.001). Data reported from measurements at the thread crest and valley. OS = OsseoSpeed TX; S a = average height deviation; S dr = developed interfacial area ratio; SL = SLA Active Bone Level; S sk = degree of symmetry of the surface heights about the mean plane; TU = TiUnite MkIII.

Article Snippet: Cylindrical threaded dental implants of similar dimensions but with different surface topographies were selected ( n = 6 per group): 4.0 × 10 mm TiUnite MkIII (TU) (Nobel Biocare AB, Göteborg, Sweden), 4.0 × 11 mm OsseoSpeed TX (OS) (Astra Tech AB, Mölndal, Sweden), and 4.1 × 10 mm SLActive Bone Level (SL) (Straumann AG, Waldenburg, Switzerland).

Techniques:

Journal: Clinical Implant Dentistry and Related Research

Article Title: Impact of High Insertion Torque on Implant Surface Integrity

doi: 10.1111/cid.70030

Figure Lengend Snippet: The surface functional height ( S vk + S k + S pk ) of implants before and after insertion into bone (* p < 0.05, ** p < 0.01, *** p < 0.001). OS = OsseoSpeed TX; S k = core roughness height of the surface with the predominant peaks and valleys removed; SL = SLA Active Bone Level; S pk = peak height above the core roughness; S vk = valley depth below the core roughness; TU = TiUnite MkIII.

Article Snippet: Cylindrical threaded dental implants of similar dimensions but with different surface topographies were selected ( n = 6 per group): 4.0 × 10 mm TiUnite MkIII (TU) (Nobel Biocare AB, Göteborg, Sweden), 4.0 × 11 mm OsseoSpeed TX (OS) (Astra Tech AB, Mölndal, Sweden), and 4.1 × 10 mm SLActive Bone Level (SL) (Straumann AG, Waldenburg, Switzerland).

Techniques: Functional Assay

Journal: Clinical Implant Dentistry and Related Research

Article Title: Impact of High Insertion Torque on Implant Surface Integrity

doi: 10.1111/cid.70030

Figure Lengend Snippet: Surface roughness S a and S dr , and material volume ( V m ) proportional difference ((Final value/Initial value)/Initial value) of the implants before and after insertion comparing normal and high torque protocols. Data reported from measurements at the crest of the thread. OS = OsseoSpeed TX; S a = average height deviation; S dr = developed interfacial area ratio; SL = SLA Active Bone Level; TU = TiUnite MkIII.

Article Snippet: Cylindrical threaded dental implants of similar dimensions but with different surface topographies were selected ( n = 6 per group): 4.0 × 10 mm TiUnite MkIII (TU) (Nobel Biocare AB, Göteborg, Sweden), 4.0 × 11 mm OsseoSpeed TX (OS) (Astra Tech AB, Mölndal, Sweden), and 4.1 × 10 mm SLActive Bone Level (SL) (Straumann AG, Waldenburg, Switzerland).

Techniques:

Journal: Clinical, Cosmetic and Investigational Dentistry

Article Title: How Much is Stable the Bonding of CAD-CAM Implant-Supported All-Ceramic Restorations to Titanium Bases Clinically? A Systematic Review

doi: 10.2147/CCIDE.S510760

Figure Lengend Snippet: Study Characteristics of the Reviewed Studies

Article Snippet: Limmer et al 2014 , Prospective , 17 (17) , FA/ Max & mand/1 piece , MZ (Prettau) , Ti-cylinders (Astra Tech, OsseoSpeed)/NR , NR , NR , 1 y , 88 , 0 , 6 chipped teeth 2 abutment fracture 1 prosthesis fracture 1 loose abutment 1 debond of a single cementable unit.

Techniques: Adhesive, Blocking Assay, Serial Time-encoded Amplified Microscopy

Journal: Communications Medicine

Article Title: Titanium micro-particles are commonly found in soft tissues surrounding dental implants

doi: 10.1038/s43856-025-00756-3

Figure Lengend Snippet: a Boxplots illustrate the volumetric density of titanium micro-particles observed in different ROIs in peri-implantitis ( n = 18) and reference implant samples ( n = 18; with exception of Zone 3 where n = 15). Median and IQR. Circles represent outliers. b Results of linear regression analysis: clinical measurements and implant-related characteristics. Scatterplots: each dot represents one implant ( n = 36); bar graphs: mean and 95%CI. c Results of linear regression analysis: volumetric density of titanium micro-particles by implant system observed in the “entire specimen”, “zone 1” and “zone with inflammation” ROIs. Implant systems were grouped in three categories: Astra Tech Osseospeed ( n = 10), Nobel TiUnite ( n = 14), Others ( n = 12). More details can be found in Table . Bar graphs: mean and 95% CI. Strip plots: median and IQR. Each dot represents one implant. * p = 0.024 (Astra Tech Osseospeed vs Nobel TiUnite); p = 0.047 (Astra Tech Osseospeed vs Others).

Article Snippet: Implant systems were grouped in three categories: Astra Tech Osseospeed ( n = 10), Nobel TiUnite ( n = 14), Others ( n = 12).

Techniques: Stripping Membranes